Pool Light Leak Detection in Orlando
Orlando Pool Leak Detection helps Orlando-area homeowners confirm and fix leaks at the pool light — a sneaky source where water escapes through the light niche or travels up the electrical conduit and out at the junction box. The giveaway is a pool that drops steadily and then stops right around the top of the light fixture. Call (321) 972-8852 or send the estimate form if that matches your pool, and please leave the fixture itself alone — the light involves electrical components that should only be handled by a professional.
How a pool light leaks
The light sits in a niche — a wet metal or plastic housing set into the pool wall — with an electrical conduit running from the back of the niche to a junction box above the waterline. Water is supposed to fill the niche; that is normal. The leak happens when water finds its way out the back: through a failed seal where the conduit meets the niche, through a cracked niche body, or up the conduit itself, sometimes appearing as dampness near the junction box or deck behind the light. Because the exit is at the niche’s height, the pool typically drains to that level and then holds.
Signs that point to the light
Three clues come up again and again: the waterline stabilizes near the top of the light fixture, the loss rate is the same whether the pump runs or not (ruling out most plumbing causes), and there is unexplained dampness near the junction box or the deck area behind the light. Any one of these is worth mentioning on the call; together they make the light niche the first thing to test.
A safety note worth repeating
Pool lights mix water and electricity by design, and they do it safely only when the components stay sealed and intact. Do not open the fixture, remove the light from the niche, or touch the wiring to investigate — there is no symptom worth that risk. Everything useful you can observe is visible from outside the pool: where the waterline stops, whether the deck behind the light is damp, and when the problem started.
How it’s confirmed and repaired
Dye testing around the niche shows whether water is actively being drawn out at the seal or conduit. Confirmed conduit leaks are typically sealed with a plug or sealant rated for submerged electrical conduit, and the fixture is reseated. A cracked niche body is rarer and scoped after inspection. Compared to excavating a buried pipe, light leak repairs are usually among the less invasive fixes — which is good news if your symptoms point here. Pricing follows the confirmed scope, with the variables covered on the cost factors page.
What happens after you reach out
Describe where the waterline stops and anything else you have noticed. The follow-up call confirms your area and symptoms, then scopes the visit with pricing and scheduling agreed before anything is booked.
Frequently asked questions
Is a leaking pool light dangerous?
The leak itself is a water-loss problem, but the fixture involves electrical components, so the inspection and any repair around the light should be left to a professional. Do not open the fixture, pull the light from the niche, or handle wiring — describe the symptom and let the visit handle the fixture safely.
Why does my pool stop losing water right at the light?
Because the leak point is at that height. When the water drops below the niche or the crack feeding it, there is nothing left to escape, so the loss stops. A stable waterline near the top of the light is one of the most reliable clues in leak detection.
How is a light niche leak fixed?
Most commonly by sealing the conduit where it enters the niche — often with a cord-and-conduit plug or sealant rated for the job — and reseating the fixture. If the niche itself has cracked, the repair is scoped after inspection. Either way it is typically far less invasive than a plumbing excavation.
Waterline stops at the light?
That is the classic light niche pattern. Call (321) 972-8852 or send the estimate form — and leave the fixture to the inspection.